Alcatel-Lucent 6850-48 Guida Di Riferimento

About This Guide

What is Not in this Manual?

OmniSwitch CLI Reference Guide

page xliii

Primarily a reference, this guide does not provide step-by-step instructions on how to set up particular 
features on the switch. It also does not provide overview or application examples on software features. For 
comprehensive information on how to configure particular software features in the switch, consult the 
appropriate configuration guide.

This guide also does not provide any information on the network management applications, WebView and 
OmniVista. Further information on WebView and OmniVista can be found in the context-sensitive on-line 
help available with those applications.

Each chapter in this guide includes reference material for all commands related to a single software 
feature, such as server load balancing or link aggregation. Typically commands in a single chapter will 
share a common prefix.

The following table contains text conventions and usage guidelines for CLI commands as they are 
documented in this guide.

Indicates basic command and keyword syntax.

Example: show snmp station

Indicates user-specific information such as IP addresses, slot numbers, 
passwords, names, etc.
Example: no snmp station ip_address

Italicized text that is not enclosed with straight brackets ([ ]) indicates 
required information.

[ ] (Straight Brackets)

Indicates optional parameters for a given command.

Example: show aaa server [server_name]
Here, you can enter either of the following options:

show aaa server server_name (where server_name is the user-
specified server name, e.g., show aaa server myserver1)

Note that this example includes italicized text. The optional parameter 
in this case is a user-specified server name.

{ } (Curly Braces)

Indicates that the user must choose between one or more parameters.

Example: port mirroring {enable | disable}
Here, you must choose one of the following:

port mirroring enable or port mirroring disable