Alcatel-Lucent 6850-48 Guida Di Riferimento
Link Aggregation Commands
page 12-50
OmniSwitch CLI Reference Guide
September 2009
show linkagg port
Displays the aggregate group information about a particular slot and port.
show linkagg [agg_num] port [slot/port]
Syntax Definitions
agg_num
Specifies the aggregate group. Configured through the static linkagg
size or lacp linkagg size command
size or lacp linkagg size command
slot
The slot number for this aggregate.
port
The port number for this aggregate.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• If no slot/port is specified, the information for all ports is displayed. If a particular slot or port is speci-
fied, the fields displayed depend upon whether or not the port belongs to a static aggregate group or
dynamic (LACP) aggregate group.
dynamic (LACP) aggregate group.
• If no agg_num is specified, the information for all aggregates is displayed.
Examples
-> show linkagg port
Slot/Port Aggregate SNMP Id Status Agg Oper Link Prim
---------+---------+-------+----------+----+----+----+----
1/9 Static 1009 ATTACHED 1 UP UP YES
1/10 Static 1010 ATTACHED 1 UP UP NO
1/11
Static 1011 ATTACHED
2
UP UP YES
-> show linkagg 1 port
Slot/Port Aggregate SNMP Id Status Agg Oper Link Prim
---------+---------+-------+----------+----+----+----+----
1/9 Static 1009 ATTACHED 1 UP UP YES
1/10 Static 1010 ATTACHED 1 UP UP NO