Alcatel-Lucent 6850-48 Guida Di Riferimento

CMM Commands

OmniSwitch CLI Reference Guide

page 1-11

Copies the working directory version of the CMM software to the certified directory, on the primary 
CMM. This command also allows you to synchronize the primary and secondary CMMs.

N/A

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• This command is used to overwrite the contents of the certified directory with the contents of the work-

ing directory. This should only be done if the contents of the working directory have been verified as 
the best version of the CMM files.

• The flash-synchro keyword, when used with the copy certified working command, synchronizes the 

files between the primary and secondary CMMs by overwriting the contents of the secondary CMM 
certified directory with the contents of the primary CMM certified directory. If the switch is part of an 
a stack, all switches in the stack are updated with the primary CMM files.

• In order for this command to work, the amount of free space in flash must equal the size of the files 

being copied. If there isn’t enough free space, the copy attempt will fail and an error message is gener-
ated. Only image files, the boot.cfg file, and the certs.pem file should be kept in the working directory.

• This command will not work if the switch is running from the certified directory. To view where the 

switch is running from, see the 

 command.

-> copy working certified

-> copy working certified flash-synchro

Release 6.1; command was introduced.