Alcatel-Lucent 6850-48 Guida Di Riferimento

Learned Port Security Commands

OmniSwitch CLI Reference Guide

page 18-19

Configures the number of bridged MAC addresses to learn before sending a trap. 

port-security slot/port[-port2] learn-trap-threshold number

The slot number for the module and the physical port number on that 
module (e.g., 3/1 specifies port 1 on slot 3).

The last port number in a range of ports you want to configure on the 
same slot (e.g, 3/1-4 specifies ports 1-4 on slot 3).

The number of bridged MAC addresses (1–100) to learn before sending 
a trap.

By default, the number of bridged MAC addresses learned is set to 5.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• When the number of bridged MAC addresses learned on the port matches the specified threshold 

amount, a trap is sent for every bridged MAC address learned thereafter. 

• Sending a trap when this threshold is reached provides notification of newly learned bridged MAC 

addresses. Trap contents includes identifying information about the MAC, such as the address itself, 
the corresponding IP address, switch identification, and the slot and port number on which the MAC 
was learned.

-> port-security 1/10 learn-trap-threshold 6

-> port-security 1/10-13 learn-trap-threshold 18

Release 6.3.1; command was introduced.

learnedPortSecurityTable

lpsLearnTrapThreshold

Displays Learned Port Security (LPS) configuration and table entries.