Alcatel-Lucent 6850-48 Guida Di Riferimento

Ethernet Port Commands

page 19-48

OmniSwitch CLI Reference Guide

Configures duplex mode on combo ports. In full duplex mode, the interface transmits and receives data 
simultaneously. In half duplex mode, the interface can transmit or receive data at a given time. Auto 
duplex setting causes the switch to advertise all available duplex modes (half/full/both) for the port during 
autonegotiation.

interfaces slot[/port[-port2]] hybrid {fiber | copper} duplex {full | half | auto}

Slot number you want to configure.

Port number of the interface you want to configure.

Last port number in a range of ports you want to configure.

Specifies that configuration changes will be made to the SFP port(s).

Specifies that changes will be made to the copper 10/100/1000 RJ-45 
port(s).

Sets interface to full duplex mode.

Sets interface to half duplex mode.

Switch will automatically set both the duplex mode settings to auto-
negotiation. 

OmniSwitch 6400, 6850, 6855

• Refer to the Hardware Users Guide for combo port numbering. 

• The MIB table and MIB object listed in the “MIB Objects” section below apply to the inactive config-

ured media only. See the “MIB Objects” section in the 

 section for the MIB table and 

MIB object for the active configured media.

-> interfaces 1/47 hybrid copper duplex auto

-> interfaces 1/47-48hybrid copper duplex half

-> interfaces 1 hybrid copper fiber full