Alcatel-Lucent 6850-48 Guida Di Riferimento

Ethernet Port Commands

OmniSwitch CLI Reference Guide

page 19-79

Displays interface port status (up or down).

show interfaces [slot[/port[-port2]]] port

Slot number you want to display.

Port number of the interface you want to display.

Last port number in a range of ports you want to display.

The status for all ports is displayed if a specific slot/port value is not specified with this command.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• You can display a specific interface by entering the slot and port number.

• You can display a range of port numbers (e.g., 3/1-4).

• You can display all interfaces in a slot by entering the slot number (e.g., 3).

• On a combo port configured as either forced fiber or preferred fiber, the status of the SFP fiber ports 

and not the copper RJ-45 10/100/1000 ports will be displayed. See the 

command for more information.

• On a combo port configured as either forced copper or preferred copper, the status of the copper RJ-45 

10/100/1000 ports and not the SFP fiber port will be displayed. See the 

 

command for more information.

-> show interfaces ethernet port

Slot/    Admin     Link    Violations                 Alias

Port     Status   Status

-----+----------+---------+----------+-----------------------------------------

 1/1    enable      down      none    ""

 1/2    enable      down      none    ""

 1/3    enable      down      none    ""

 1/4    enable      down      none    ""