Alcatel-Lucent 6850-48 Guida Di Riferimento

Ethernet Port Commands

OmniSwitch CLI Reference Guide

page 19-107

Displays interface error frame information (e.g., CRC errors, transit errors, receive errors) for combo 
ports.

show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} counters errors

Slot number you want to display.

Port number of the interface you want to display.

Last port number in a range of ports you want to display.

Specifies that statistics for the SFP port(s) will be displayed.

Specifies that statistics for the copper 10/100/1000 RJ-45 port(s) will be 
displayed.

N/A

OmniSwitch 6400, 6850, 6855

• If no slot/port numbers are entered, counter error information for all slots/ports on the switch is 

displayed.

• You can display a specific interface by entering the slot and port number (e.g., 3/1).

• You can display a range of port numbers (e.g., 3/1-4).

• You can display all interfaces in a slot by entering the slot number (e.g., 3).

• These counters do not apply to Gigabit Ethernet traffic.

-> show interfaces 1/47 hybrid copper counters errors

01/47,

  Alignments Errors = 6.45E13,  FCS Errors = 7.65E12

  IfInErrors        = 6435346,  IfOutErrors= 5543,

  Undersize pkts    = 867568, Oversize pkts = 5.98E8

Interface slot and port number.

Number of Alignments errors.