Alcatel-Lucent 6850-48 Guida Di Riferimento

Port Mobility Commands

page 20-24

OmniSwitch CLI Reference Guide

Defines a protocol rule for an existing VLAN. If a device sends traffic that matches the protocol value 
specified in the rule, the device and its mobile port will join the rule’s VLAN. 

vlan vid protocol {ip-e2 | ip-snap | ipx-e2 | ipx-novell | ipx-llc | ipx-snap | decnet | appletalk | 
ethertype type | dsapssap dsap/ssap | snap snaptype}

vlan vid no protocol {ip-e2 | ip-snap | ipx-e2 | ipx-nov | ipx-llc | ipx-snap | decnet | appletalk | 
ethertype type | dsapssap dsap/ssap | snap snaptype}

VLAN ID number (1–4094).

IP Ethernet-II protocol. Also captures Address Resolution Protocol 
(ARP).

IP Sub-network Access Protocol (SNAP) protocol.

IPX Ethernet-II protocol.

IPX Novell (802.3) protocol.

IPX LLC (802.2) protocol.

IPX SNAP protocol.

DECNET Phase IV (6003) protocol.

AppleTalk protocol. Also captures Datagram Delivery Protocol (DDP) 
and AppleTalk ARP (AARP).

A two-byte hex value between 0x600 and 0xffff that defines an Ether-
net type (e.g., 0600, 0806, 6002). 

A one-byte hex value between 0x00 and 0xff that defines Destination 
Service Access Protocol (DSAP) and Source Service Access Protocol 
(SSAP) header values. Specify both a DSAP and an SSAP value for this 
parameter variable (e.g., F0/F0, 04/04, BC/BC).

A two-byte hex value between 0x600 and 0xffff that defines a SNAP 
protocol.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E