Alcatel-Lucent 6850-48 Guida Di Riferimento

VLAN Management Commands

page 21-2

OmniSwitch CLI Reference Guide

Creates a new VLAN with the specified VLAN ID (VID) and an optional description. 

vlan vid1[-vid2] [enable | disable] [name description]

no vlan vid1[-vid2]

An existing VLAN ID number (1–4094).

The last VLAN ID number in a range of VLANs that you want to 
configure (e.g. 10-12 specifies VLANs 10, 11, and 12).

Text string up to 32 characters. Use quotes around string if description 
contains multiple words with spaces between them (e.g. “Alcatel-Lucent 
Marketing VLAN”).

Enable VLAN administrative status.

Disable VLAN administrative status.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to delete a VLAN from the configuration. All VLAN ports and rout-

ers are detached before the VLAN is removed. Ports return to their default VLANs or VLAN 1, if the 
VLAN deleted is the port’s configured default VLAN.

• Note that specifying multiple VLAN IDs and/or a range of VLAN IDs on the same command line is 

allowed. Use a hyphen to indicate a contiguous range and a space to separate multiple VLAN ID 
entries (e.g., vlan 10-15 500-510 850).

• A VLAN is not operationally active until at least one active port is assigned to the VLAN.

• When a VLAN is administratively disabled, static port and dynamic mobile port assignments are 

retained but traffic on these ports is not forwarded. However, VLAN rules remain active and continue 
to classify mobile port traffic for VLAN membership.

• Ports are manually configured or dynamically assigned to VLANs.

VLAN ID