Alcatel-Lucent 6850-48 Guida Di Riferimento
VLAN Stacking Commands
page 23-2
OmniSwitch CLI Reference Guide
September 2009
ethernet-service
Creates a VLAN Stacking VLAN (SVLAN) for tunneling customer traffic, a management SVLAN for
provider traffic, or an SVLAN that the IP Multicast VLAN (IPMV) application will use to distribute
multicast traffic.
provider traffic, or an SVLAN that the IP Multicast VLAN (IPMV) application will use to distribute
multicast traffic.
ethernet-service {svlan | ipmvlan | management-vlan} svid1[-svid2] [enable | disable] [[1x1 | flat] stp
{enable | disable}] [name description]
{enable | disable}] [name description]
no ethernet-service {svlan | ipmvlan | management-vlan} svid1[-svid2]
Syntax Definitions
svlan
Creates an SVLAN for tunneling customer traffic.
ipmvlan
Creates an SVLAN used by IPMV to distribute multicast traffic.
management-vlan
Creates a management SVLAN for provider traffic.
svid1
The VLAN ID number identifying the SVLAN (2–4094).
-svid2
The last VLAN ID number in a range of SVLANs that you want to
configure (e.g. 10-12 specifies VLANs 10, 11, and 12).
configure (e.g. 10-12 specifies VLANs 10, 11, and 12).
enable
Enables the SVLAN administrative status.
disable
Disables the SVLAN administrative status, which blocks all ports bound
to that SVLAN.
to that SVLAN.
1x1
Specifies that the Spanning Tree status for the SVLAN applies when the
switch is running in the 1x1 Spanning Tree mode.
switch is running in the 1x1 Spanning Tree mode.
flat
Specifies that the Spanning Tree status for the SVLAN applies when the
switch is running in the flat Spanning Tree mode.
switch is running in the flat Spanning Tree mode.
stp enable
Enables the SVLAN Spanning Tree status for the service provider
network topology.
network topology.
stp disable
Disables the SVLAN Spanning Tree status for the service provider
network topology.
network topology.
description
An alphanumeric string of up to 32 characters. Use quotes around the
string if the VLAN name contains multiple words with spaces between
them (e.g., “Alcatel-Lucent Engineering”).
string if the VLAN name contains multiple words with spaces between
them (e.g., “Alcatel-Lucent Engineering”).
Defaults
By default, the Spanning Tree status is enabled in both the 1x1 and flat mode when the SVLAN or IPMV
is created
is created
parameter
default
enable | disable
enable
stp enable | disable
enable
description
VLAN ID number