Alcatel-Lucent 6850-48 Guida Di Riferimento
VLAN Stacking Commands
page 23-44
OmniSwitch CLI Reference Guide
September 2009
show ethernet-service uni-profile
Displays the profile attribute configuration for VLAN Stacking User Network Interface (UNI) profiles.
show ethernet-service uni-profile [uni-profile-name]
Syntax Definitions
uni-profile-name
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., “Alcatel-Lucent Engineering”).
the profile name contains multiple words with spaces between them
(e.g., “Alcatel-Lucent Engineering”).
Defaults
By default, all UNI profiles are displayed if a UNI profile name is not specified with this command.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Specify a UNI profile name to display attributes for a single UNI profile.
Examples
-> show ethernet-service uni-profile
Profile Name Stp 802.1x 802.3ad 802.1AB GVRP AMAP
+----------------+-------+--------+---------+----------+--------+---------+
uprofile-video1 tunnel drop peer drop tunnel drop
Release History
Release 6.3.1; command was introduced.
output definitions
Profile Name
The name of the UNI profile.
Stp
Indicates how Spanning Tree traffic control packets are processed.
802.1x
Indicates how IEEE 802.1x control packets are processed.
802.3ad
Indicates how IEEE 802.3ad control packets are processed.
802.1AB
Indicates how IEEE 802.1AB control packets are processed.
GVRP
Indicates how GARP VLAN Registration Protocol packets are pro-
cessed.
cessed.
AMAP
Indicates how Alcatel-Lucent Mapping adjacency Protocol packets are
processed.
processed.