Alcatel-Lucent 6850-48 Manuale Hardware

OmniSwitch 6850 Series Chassis and Hardware Components

OmniSwitch 6850 Series Power Supplies

OmniSwitch 6850 Series Hardware Users Guide

page 2-81

3 Carefully slide the power supply against the back of the chassis until the power connector connect.

4 If you have installed the power shelf tighten the captive screws (or screws) located at back of the 
power supply to the power shelf.

The following sections describe how to rack-mount a power supply shelf and connect the power supply 
with a cable.

Follow the steps below to rack-mount the power supply shelf:

1 Align the threaded holes in the provided rack-mount flanges with the two holes in the power supply 
shelf. These holes are located on the left and right sides of the shelf.

2 Attach the flanges to the chassis using the provided Phillips-head screws. The screws slide through the 
non-threaded holes from the inside of the power supply shelf and are then attached to the mounting brack-
ets using the threaded holes. Be sure to tighten each of the screws firmly using a Phillips screwdriver.