Alcatel-Lucent 6850-48 Manuale Hardware
OmniSwitch 6850 Series Chassis and Hardware Components
Monitoring the Chassis
OmniSwitch 6850 Series Hardware Users Guide
September 2009
page 2-91
Checking the Fan Status
To check the current status for all six fans in the chassis, use the
command. For example:
-> show fan
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
1 4 Running
1 5 Running
1 6 Running
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
1 4 Running
1 5 Running
1 6 Running
For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.
Checking the Power Supply Status
Additional Monitoring Commands
CLI Commands Used for Monitoring a Chassis
Displays the basic hardware and status information for primary and
secondary management modules (if applicable).
secondary management modules (if applicable).
Displays the basic hardware and status information for individual mod-
ules. If the switch is a standalone, information for the stand alone
switch displays.
ules. If the switch is a standalone, information for the stand alone
switch displays.
Displays the basic information for individual modules. If the switch is a
standalone, information for the stand-alone switch displays.
standalone, information for the stand-alone switch displays.
Displays the detailed information for individual modules. If the switch
is a standalone, information for the standalone switch displays.
is a standalone, information for the standalone switch displays.
Displays the basic status information for individual modules. If the
switch is a standalone, information for the standalone switch displays.
switch is a standalone, information for the standalone switch displays.