Fujitsu fi-6670 Guida Utente
Chapter 8 Troubleshooting
139
Scanning does not start.
Did you unlock the Transport Lock?
(Flatbed type)
(Flatbed type)
NO
Turn OFF the scanner and unlock the Transport Lock.
For how to unlock the Transport Lock, refer to "Chapter 3 Connecting the Cables"
in the Getting Started.
For how to unlock the Transport Lock, refer to "Chapter 3 Connecting the Cables"
in the Getting Started.
YES
Is the document loaded correctly on the ADF Paper
Chute?
Chute?
NO
Reload the document correctly on ADF Paper Chute.
YES
Is the ADF closed completely?
NO
Remove the document in the ADF Paper Chute, open the ADF, and then close it
completely.
completely.
YES
Is the interface cable connected correctly?
NO
Connect the interface cable correctly.
For how to connect the cable, refer to "Chapter 3 Connecting the Cables" in the
Getting Started.
For how to connect the cable, refer to "Chapter 3 Connecting the Cables" in the
Getting Started.
YES
Is the connector for the interface cable broken?
YES
Use a new interface cable and correctly connect it.
NO
Is the specified SCSI ID correctly set?
(when a SCSI interface cable is used)
(when a SCSI interface cable is used)
NO
Turn off the scanner and the computer, specify a correct SCSI ID. Turn on the
scanner again. Then, restart the computer.
For how to specify the SCSI ID, refer to "Chapter 3 Connecting the Cables" in the
Getting Started.
scanner again. Then, restart the computer.
For how to specify the SCSI ID, refer to "Chapter 3 Connecting the Cables" in the
Getting Started.
YES
Does the scanning start after turning on the scanner
again?
again?
YES
The scanner operation is normal.
NO
If you cannot solve the problem after taking the measures above, check the items
shown in
shown in
, and then contact the dealer where you purchased the scanner or an
authorized FUJITSU scanner service provider.