Fujitsu fi-5900C Guida Utente
fi-5900C Image Scanner Getting Started
3
■ Indications on the Function
Number Display
The following shows the indications on the Function
Number Display.
HINT
Operator Panel Overlays are available in
French, German, Italian, Spanish, Chinese,
Russian and Korean. To change the over-
lay, open the plastic cover.
French, German, Italian, Spanish, Chinese,
Russian and Korean. To change the over-
lay, open the plastic cover.
nd t
Thin
Send
to
Scan
No.
Descriptions
Lights only one time upon turning on the
scanner.
scanner.
Indicates that the scanner has been turned ON
and is being initialized.
and is being initialized.
Indicates that initialization has been completed
successfully.
This status is called "Ready Status".
Indicates that a temporary error (that users can
solve) has occurred during the initialization or
solve) has occurred during the initialization or
scanning of documents.
"U" and an error number (1, 2, 4, 6, 8) are dis-
played alternately.
played alternately.
To return the scanner to the ready status ("1"),
press the "Scan" or "Send to" button while the
error is indicated.
press the "Scan" or "Send to" button while the
error is indicated.
Indicates that a device alarm (that users can not
solve) has occurred during the initialization or
scanning of documents.
scanning of documents.
"E" and an alarm number (0, 2 to 9, and A, c, d,
F, 10 to 12, 15 to 19, 1A) are indicated alter-
nately.
nately.
To return the scanner to the ready status ("1"),
press "Scan" or "Send to" button.
If this alarm occurs, turn the power off and then
If this alarm occurs, turn the power off and then
on again. If the alarm is indicated after turning on
the power again, contact your service engineer.