Fujitsu s300 Manuale Di Servizio
3.1 Flow of Operations
ScanSnap S300 Operator's Guide
33
Using the ScanSnap
3
4. Press the [SCAN] button
on the ScanSnap.
⇒
Scanning is started.
⇒
The power indicator (lamp)
on the ScanSnap blinks blue during the scanning operation.
The following window appears to indicate the scanning status.
HINT
•
By default, documents are scanned in Duplex mode when you press the
[SCAN] button. In the [ScanSnap Manager - Scan and Save Settings] dialog
box, you can switch the scanning mode of the [SCAN] button to Simplex
mode.
[SCAN] button. In the [ScanSnap Manager - Scan and Save Settings] dialog
box, you can switch the scanning mode of the [SCAN] button to Simplex
mode.
•
Scanning can also be started by using the ScanSnap Manager icon
on
the taskbar.
For details about this operation, refer to section
For details about this operation, refer to section
ATTENTION
•
Do not connect or disconnect other USB devices during the scanning
operation.
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation. Otherwise, the
scanning is canceled.
scanning is canceled.
S
S