Klein 59001 drill bit Guida Di Riferimento
All dimensions are in inches and (millimeters).
See end of section for important safety information regarding the test and measurement line.
321
AUTO
A
AC
CL200
Electrical T
est & Measur
ement
WARNINGS:
• It is important that users of this tester read, understand, and follow all
warnings, cautions, safety information, and instructions in the manual before
operating or servicing this tester. Failure to follow instructions could result in
death or serious injury.
• Risk of electric shock and burn. Contact with live circuits could result in death
or serious injury.
• Use caution with voltages above 30V AC as a shock hazard may exist.
• A blinking or steady red glow and an audible beep indicate voltage present. If
no indication, voltage could still be present.
• In bright light conditions, the LED visual indicators will be less visible.
• Do not use if green LED is not illuminated.
WARNINGS:
• Do not use if tester appears damaged or if the tester is not operating properly.
If in doubt, replace the tester.
• Do not apply more than the rated voltage as marked on the tester
(1000 volts AC).
• Always wear approved eye protection.
• Before each use, verify operation by testing a known working circuit that is
within the rating of this tester.
• Do not rely on this tester with shielded wire. Operation may be affected by
differences in socket design and insulation thickness and type.
• Comply with local and national safety requirements.
• If this tester is used in a manner not specified by the manufacturer, protection
provided by the tester may be affected.
CAUTION:
Do not attempt to repair this tester. It contains no serviceable parts. Do not expose the product to extremes in temperature or high humidity.
Non-Contact Voltage Testers (NCVT-1/NCVT-2)
•
Non-contact detection of standard voltage in cables, cords,
circuit breakers, lighting fixtures, switches, outlets, and wires.
•
High intensity, bright green LED indicates the tester is
operational and aids in illuminating the workspace.
•
Digitally controlled ON/OFF power button.
•
Auto power-off feature conserves and extends
battery life.
•
Microprocessor controlled low-battery indicator.
•
CAT IV 1000 Volt rating provides expanded operation and protection.
•
Lightweight, durable polycarbonate plastic resin construction
with a convenient pocket-clip.
•
Package contains insert card w/ integrated owner's manual
and two AAA 1.5 volt batteries.
Additional Features for Dual Range NCVT-2
•
Automatically detects and indicates low voltage
(12-48 Volts AC) and standard voltage (48-1000 Volts AC),
allowing broad application.
•
Non-contact detection of low-voltage in security,
entertainment, communications, environmental control,
and irrigation systems.
NCVT-1
Standards:
UL 61010-1 2nd edition
CAN/CSA C22.2 No. 610101-04
EN 61010-1 2nd edition
IEC 61010-1:2001 2nd edition
ISA-82.02.01 (IEC 61010-1 MOD)
E321008 3TMV
CAT
IV
Double
Insulated
Cat. No. Voltage
Range
Frequency
Range
Pollution
Degree
Batteries Overall
Length
Width
Height
Weight
(oz.)
Weight
w/ Batteries (oz.)
NCVT-1
48-1000 volts AC 50-500 Hz
2
2 x AAA
5.50" (140 mm)
0.72" (18 mm) 1.0" (25 mm)
0.8 oz. (23 g) 1.6 (46 g)
NCVT-2
12-1000 volts AC 50-500 Hz
2
2 x AAA
5.50" (140 mm)
0.72" (18 mm) 1.0" (25 mm)
0.8 oz. (23 g) 1.6 (46 g)
Voltage
Range
12 TO 48 VOLTS AC
(Low) (NCVT-2 only)
48 TO 1000 VOLTS AC
(Standard)
Audible
low-pitched pulsing beeping sound
high-pitched continuous beeping sound
Visual
blue LED turns off and
red LED blinks (approximately
2-times per second).
green LED turns off and
red LED illuminates continuously.
NCVT-2
Electrical Testers