Klein 59001 drill bit Guida Di Riferimento
128
W
renches
WARNING:
Always wear approved eye protection.
WARNING:
NOT insulated. Plastic-dipped or slip-on plastic handles are
NOT intended for protection against electrical shock.
All dimensions are in inches and (millimeters).
WARNING:
Do NOT push or hammer wrench.
WARNING:
Do NOT extend handle length.
Lineman’s Wrenches
•
Forged from special bar steel and
heat-treated for long life.
•
Each end has two different size openings.
•
Hole is provided at larger end for turning-in standard pole steps.
•
Wrench is suited for use on heavy three-bolt guy clamps on which clearance is limited.
Cat. No.
Description
Length
Weight (lbs.)
3146
For 5/8" hardware. Large end has 29/32" and 1-3/32" openings. Small end has 5/8" and 13/16" openings.
13" (330 mm)
1.85
3146A
For 3/4" hardware. Large end has 1-1/16" and 1-5/16" openings. Small end has 5/8" and 7/8" openings.
13" (330 mm)
1.70
3146
Bell System Type
•
Similar to standard lineman’s wrench, but with end
openings sized to NEMA hardware specifications.
•
Silver painted finish.
Cat. No.
Description
Length
Weight (lbs.)
3146B
Large end has 1-1/16" and 1-3/16" openings. Small end has 11/16" and 7/8" openings.
13" (330 mm)
1.76
3146B
Specialty Wrenches
Can Wrench
•
Two tools in one; saves space in your pouch.
•
One end opens telephone box fasteners, the other end
tightens nuts on binding-post terminals.
•
The 7/16" socket has a black finish and the 3/8" socket has a silver finish.
•
Sockets are 1-1/4" (32 mm) deep to fit over long binding posts
and are thin-walled for easy access into tight areas.
•
Socket ends are color-coded for quick identification of socket sizes.
Cat. No.
Description
Length
Handle Dia.
Weight (lbs.)
68005
3/8" and 7/16" hex nut 7" (178 mm) 1" (25 mm)
.35
68005
WARNING: NOT insulated. Will NOT protect against electrical shock.
•
Hex-socket design enables using
a wrench to obtain extra torque.
•
High-impact, break-resistant handle
for long and dependable service.
•
Sockets are heat-treated, alloy steel.
Lineman’s Ratcheting Wrenches
•
Bolt-through design allows bolts to pass
through the socket.
•
3/4" and 1" x 1-1/8" combination square socket
for most common utility hardware.
•
Bright yellow socket for easy visibility.
•
Works on most common utility pole hardware,
such as lag bolts, “C” clamps and suspension bolts.
•
KT155T and KT155HD also offer two popular
wrench sizes: 9/16" and 3/4".
•
Heavy duty design (KT155HD).
Cat. No. Description
Length
Weight (lbs.)
KT155HD Ratcheting Lineman's Wrench -
Heavy Duty
12" (305 mm)
2.10
KT151T
Ratcheting Lineman's Wrench
13" (330 mm)
2.12
KT155T
5-in-1 Lineman’s Wrench
9-3/8" (238 mm)
1.42
KT155T
KT155HD
3-in-1 Impact Socket
•
Includes 3/4"(also works on 13/16"), 1" and 1-1/8" square sizes.
•
Fine tuned ball detent provides improved retention, minimizing drops.
•
7/16" hex quick-change adapter included.
•
13/16" diameter, 6" long hollow shaft allows use on long threaded bolts.
Cat. No.
Description
Length
Weight (lbs.)
NRHD
3-in1 Impact Socket
7-3/4" (197 mm)
2.0
KT151T
NRHDA
Replacement Adapter
Replacement Parts
NRHDA Impact Socket Adapter
NRHDA Impact Socket Adapter
NEW!
NRHD
NRHDA
•
Dark blue painted finish (small end
is painted silver on Cat. No. 3146A).