Klein 59001 drill bit Guida Di Riferimento
232
WARNING:
Grips are to be used for temporary installation, not for
permanent anchorage.
All dimensions are in inches and (millimeters) unless otherwise specified.
WARNING:
Do not exceed rated capacity.
WARNING:
When used on/or near energized lines, ground, insulate, or
isolate grip before pulling.
WARNING:
Before each use, clean jaw area and inspect grip for proper
operation to avoid slippage.
WARNING:
Always match proper size and type of grip to application.
Wir
e Pulling Grips
Copper – Chicago
®
Grips
Notched
Jaw
Weatherproof Stranded and Solid
Chicago
®
Grips – 1611 Series
1611-30
Cat. No.
Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
4,500 lbs. (2,041 kg) Maximum Safe Load
1611-20
1611-20
.20" - .40" (5.08 mm - 10.16 mm)
4-3/16" (106 mm)
3 lbs. (1.36 kg)
1611-30
.31" - .53" (7.87 mm - 13.46 mm)
4-3/4" (121mm)
3.75 lbs (1.70 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1611-40
1611-40
.53" - .74" (13.46 mm - 18.80 mm)
5-11/16" (144 mm)
7.75 lbs (3.52 kg)
1611-50
.74" - .86" (18.80 mm - 21.84 mm)
5-11/16" (144 mm)
7.75 lbs (3.52 kg)
Note: Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable.
•
Round inside jaw contour for weatherproof coated wire.
•
Notches in jaw provide firm grip on insulation.
PVC-Covered
Chicago
®
Grips – 1659 Series
•
Specially machined serpentine jaws allow insulated
conductor to be inserted through jaws.
•
Eliminates necessity of stripping insulation
from conductor.
•
Round inside-jaw contour.
1659-30
Serpentine
Jaw
Cat. No.
Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
4,500 lbs. (2,041 kg) Maximum Safe Load
1659-20
1659-20
.20" - .42" (5.08 mm - 10.67 mm)
4-3/16" (106 mm)
3 lbs. (1.36 kg)
1659-30
.31" - .50" (7.87 mm - 12.70 mm)
4-3/4" (121 mm)
3.75 lbs (1.70 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1659-40
1659-40
.49" - .79" (12.45 mm - 20.07 mm)
5-11/16" (144 mm)
7.75 lbs (3.52 kg)
1659-50
.79" - 1.01" (20.07 mm - 25.56 mm)
5-11/16" (144 mm)
7.75 lbs (3.52 kg)
Cat. No.
Hot Latch
Model No.
Hot Latch/Spring
Model No.
Min. to Max. Cable
Diameter inches (mm)
Jaw
Length
Approx.
Weight Each
4,500 lbs. (2,041 kg) Maximum Safe Load
1656-20
1656-20
1656-20H
S1656-20H
.20" - .40" (5.08 mm - 10.16 mm)
4" (102 mm)
3 lbs. (1.36 kg)
1656-30
1656-30H
S1656-30H
.31" - .53" (7.87 mm - 13.46 mm)
4 3/4" (121 mm) 3.75 lbs (1.70 kg)
8,000 lbs. (3,629 kg) Maximum Safe Load
1656-40
1656-40
1656-40H
S1656-40H
.53" - .74" (13.46 mm - 18.80 mm)
5 1/2" (140 mm) 8.30 lbs (3.76 kg)
1656-50
1656-50H
S1656-50H
.74" - .86" (18.80 mm - 21.84 mm)
5 1/2" (140 mm) 8.30 lbs (3.76 kg)
1656-60
1656-60H
S1656-60H
.86" - .96" (21.84 mm - 24.38 mm)
5 1/2" (140 mm) 8.20 lbs (3.71 kg)
Bare Stranded
Chicago
®
Grips – 1656 Series
1656-30
•
Round, smooth inside jaw contour on this series of
grips is ideal for stranded-copper cables.
•
Smooth jaws grip with maximum contact are less
likely to cause cable deformation.