Klein 59001 drill bit Guida Di Riferimento
76
Insulated T
ools
W
EA
R Y
EY P
ROTECTIO
N
D
21
3 -
9NE NNS
WARNING:
Whenever possible, always de-energize lines and equipment
prior to working on or around them. Klein insulated tools are designed only
to reduce the chance of injury where the tool may make contact with an
energized source.
WARNING:
Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING:
Only use tools that are marked with the official international
1000-volt rating symbol shown below, if there is any chance that the tools
will make contact with an energized source.
WARNING:
Wear approved eye protection. Always inspect your tools before
use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy
tool if white layer shows through orange layer.
WARNING:
Because moisture, films, or other surface contaminants are
conductive, Klein insulated tools must be kept clean, dry, and free of any
surface contaminants.
All dimensions are in inches and (millimeters).
Stripper/Cutters
Insulated Wire Stripper/Cutter
Additional Features:
•
Gauges, cuts, strips, and loops wire.
•
Spring-loaded for self-opening.
•
Compact, lightweight wire-stripping, cutting tool.
•
Narrow nose fits into tight places.
•
Do not use for cutting steel wire or bolts.
•
Hardened spring steel with precision-ground
stripping holes for easy removal of insulation.
Cat.No.
Overall Length
Strips and Cuts
Handle Color
Weight
11045-INS
7" (178 mm)
10, 12, 14, 16, 18 solid AWG (4.0 mm
2
, 2.5 mm
2
, 1.5 mm
2
, 1.0 mm
2
, 0.75 mm
2
)
orange
.70 lbs. (0.32 kg)
11049-INS
7" (178 mm)
8, 10, 12, 14, 16 stranded AWG (6.0 mm
2
, 4.0 mm
2
, 2.5 mm
2
, 1.5 mm
2
, 1.0 mm
2
)
orange
.70 lbs. (0.32 kg)
11049-INS
®
Insulated Wire Stripper/Cutter
Additional Features:
•
Cuts, strips, loops and gauges both solid and stranded wire.
•
Spring-loaded for self-opening.
•
Serrated nose for easy bending, shaping
and pulling of wire.
•
Cleanly shears 6-32 and 8-32 scews.
•
Do not use for cutting steel wire.
Cat.No.
Overall
Length
Strips and Cuts
Handle
Color
Weight
11055-INS
8"
(203 mm)
10, 12, 14, 16, 18 AWG solid
12, 14, 16, 18, 20 AWG stranded
orange
.75 lbs.
(0.34 kg)
11055-INS
All dimensions are in inches and (millimeters).
WARNING:
Do NOT touch uninsulated portion of the tool or any
conductive object when either might contact an energized source.
WARNING:
Wear approved eye protection. Always inspect your tools
before use. Do not use if orange coating cracks, breaks or becomes damaged.
Destroy tool if white layer shows through orange layer.
WARNING:
Because moisture, films, or other surface contaminants are
conductive, Klein insulated tools must be kept clean, dry, and free of any
surface contaminants.
WARNING:
Only use tools that are marked with the official international
1000-volt rating symbol shown below, if there is any chance that the tools
will make contact with an energized source.
WARNING:
Do NOT use screwdrivers to pry or chisel.
WARNING:
Whenever possible, always de-energize lines and equipment
prior to working on or around them. Klein insulated tools are designed only
to reduce the chance of injury where the tool may make contact with an
energized source.
Screwdrivers and Nut Drivers
Features:
Custom,
US-made
tool steel.
Durable, two layer,
molded insulation.
Bright orange outer coating
is flame and impact resistant.
Hollow shafts
make it possible
to work on stacked circuit boards
or other long bolt applications.
Klein insulated tools meet or exceed the
IEC 60900 and ASTM F1505 standards,
for insulated tools, and are clearly marked
with the official 1000-volt rating symbol.
Patented Tip-Ident
®
quickly identifies nut
driver size.
Cushion-Grip handles
for greater torque
and comfort.
Thick, exceptionally tough,
high-dielectric white inner
coating is bonded to the tool.
MADE IN USA