Klein 59001 drill bit Guida Di Riferimento
94
Scr
ew
driv
ers, Nut Driv
ers
& Ac
cessories
WARNING:
Always wear approved eye protection.
WARNING:
NOT insulated. Will NOT protect against electrical shock.
All dimensions are in inches and (millimeters).
WARNING:
Do NOT use to pry or chisel.
Demolition Screwdrivers — Keystone-Tip
602-4DD
•
Engineered, manufactured
and tested for prying and chiseling.
•
Plated metal strike cap to protect
handle from hammer blows.
•
Heat treated metal shaft runs complete
length of handle to metal strike cap to
transfer metal strike force.
602-7DD
NEW!
Cat. No.
Tip Size
Tip Type
Blade Length
Overall Length
Weight (lbs.)
602-4DD
1/4"
keystone
4" (102 mm)
9" (229 mm)
.37 (0.17 kg.)
602-7DD
5/16"
keystone
7" (178 mm)
12-3/8" (314 mm)
.56 (0.25 kg.)
Specialty Screwdrivers
Conduit-Fitting and Reaming Screwdriver
Additional Features:
•
Hooded-blade design keeps tip from slipping out of screws,
especially when tightening hard-to-reach conduit fittings.
Thicker hood is designed for rugged use.
•
Reams and smooths 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) thin-wall
conduit ends to protect wire and permit correct installation of fittings.
•
Reams both the inside and outside of the conduit at the same time.
•
Replaceable reaming blade is now held in place with a 1/16" set screw.
85191
Cat. No.
Tip Size
Shank Length
Overall Length
Weight (lbs.)
85191
5/16" (8 mm)
2-1/2" (64 mm)
7-1/2" (191 mm)
.50
19353
conduit reamer replacement blade kit
.01
Conduit Reamer
Cat. No.
Conduit Capacity
Weight (lbs.)
19352
1/2", 3/4", 1"
.20
19353
conduit reamer replacement blade kit for 19352
.01
19351
conduit reamer replacement blade for 19350
.01
19352
•
Locks onto screwdrivers; reams and smooths thin-wall conduit.
•
Reams ID and OD at the same time.
•
Two set-screws for round- and square-shank screwdrivers.
•
Fits up to 3/8" (10 mm) keystone-tip screwdrivers.
•
NOT for use on power tools.
Power Conduit Reamer
Cat. No.
Conduit Capacity
Weight
85091
conduit reamer drill head for 1/2", 3/4" and 1" conduit
.33 lbs. (0.15 kg.)
19353
conduit reamer replacement blade
.01 lbs. (0.004 kg.)
4H1R2
#2 square recess replacement bit
.01 lbs. (0.004 kg.)
85091
•
Ream 1/2", 3/4" and 1" conduit and install fittings in a fraction of the time.
•
Reduce time on projects with large quantities of conduit runs.
•
Designed to fit into power drill chucks and quick release adapters; impact ready.
•
Includes precision engineered replaceable reaming blade.
•
Replacement blades are available and the only approved blade for use in our tool.
•
Replacement bits are available but any standard ¼” hex bit will work.
NEW!