RCA D30W750T Guida Utente
Connections & Setup
12
Chapter 1
Connections & Setup
Chapter 1
13
�
�
����
���������
�����
�
�
�
�
�
����
����
����������������
�������
�
�
�
�
�
�
COMPONENT INPUT Lets you connect a component video source, such as a DVD
player.
player.
• CMP1 Y PB PR (Component Video) Provides optimum picture quality because
the video is separated into three signals. Use three video-grade cables for the
connection. When using CMP1 Y PB PR, make sure to connect left and right audio
cables to the CMP1 L and R Audio Input jacks.
connection. When using CMP1 Y PB PR, make sure to connect left and right audio
cables to the CMP1 L and R Audio Input jacks.
• CMP1 L (Audio) Provides left audio connection. The left audio connector is
usually white.
• CMP1 R (Audio) Provides right audio connection. The right audio connector is
usually red.
Note: Model D30W750T has an extra set of component video input jacks,
labelled CMP2.
COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD
player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.
player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.
• VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2
Video) because the color part of the picture is separated from the black and white
part of the picture. When using VID1 S-VIDEO, make sure to connect left and right
audio cables to the VID1 L/MONO and R Audio Input jacks.
part of the picture. When using VID1 S-VIDEO, make sure to connect left and right
audio cables to the VID1 L/MONO and R Audio Input jacks.
• VID1 V (Video) Provides composite video connection. The video connector is
usually yellow.
• VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a
component such as a VCR, DVD player, or laserdisc player. Their description is
the same as VID1 above.
the same as VID1 above.
Note: For each VID jack group (VID1 and VID2), you may connect either an S-
Video or Video cable. Do not connect both at the same time in either of the VID
jack groups.
Video or Video cable. Do not connect both at the same time in either of the VID
jack groups.
DVI-HDTV Input Lets you connect an HDTV Tuner with a DVI output.
• DVI (Digital Visual Interface) Provides an uncompressed, digital video interface
developed for high-bandwidth digital connection. It supports the overlay of high-
resolution graphics needed by some electronic program guide navigation and other
interactive services. DVI, when combined with HDCP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The DVI-
HDTV connection is designed to display either progressive scan (480p) or HDTV
(1080i) signals at a bandwidth of up to 1.78 Gigabits per second.
resolution graphics needed by some electronic program guide navigation and other
interactive services. DVI, when combined with HDCP (High bandwidth Digital
Content Protection) technology, creates a protected digital connection. The DVI-
HDTV connection is designed to display either progressive scan (480p) or HDTV
(1080i) signals at a bandwidth of up to 1.78 Gigabits per second.
• L (Audio) Provides left audio connection when using the DVI jack. The left audio
connector is usually white.
• R (Audio) Provides right audio connection when using the DVI jack. The right
audio connector is usually red.
Note: Remember to connect the left and right audio cables because the DVI
cable carries only the picture signal, not the sound.
cable carries only the picture signal, not the sound.
��������
�
�