Intellinet 500500 Manuale Utente

peer-to-peer communication. 

Infrastructure:  It can let your network device join a wireless LAN 

through an access point. 

Channel 

Select the appropriate channel from the list provided to correspond with 

your network settings. Channels differ from country to country. 

Channel 1-11 (North America) 

Channel 1-14 (Japan) 

Channel 1-13 (Europe) 

There are 14 channels available.     

Security  

Disable: Disable the security function. 

WEP: WEP is an authentication algorithm, which protects authorized         

Wireless LAN users against eavesdropping. The Authentication type and 

WEP key of wireless stations must be the same with the Access Point. 

This Access Point supports 64/128-bit WEP Encryption function. With this 

function, your data will be transmitted over the wireless network securely. 

# You can refer to the detail setting from chapter 3.2.6. 

WPA: You can use a pre-shared key to authenticate wireless stations 

and encrypt data during communication. When you enabled WPA mode, 

you can not use WEP encryption.   

# You can refer to the detail setting from chapter 3.2.7. 

Preamble Type 

Preamble type defines the length of preamble block in the frames during 

the wireless communication. 

Auto select: It will auto switch to the more suitable method. 

Short: It is suitable for high traffic wireless network 

Long: It can provide more reliable communication   

Transmit Rate 

When you enable the station mode selection to “802.11b” and it allows 

you to select the speed of 1-11Mbps. When you enable the station mode 

selection to “802.11g” and it allows you to select the speed of 1-54Mbps. 

Click Apply button at the bottom of the screen to save the above configurations. You can now 

configure other advance sections or start using the Access Point. 

 

 

 
Site Survey table: