Intellinet 519021 Guida Utente
Modularized 24+2G Switch
81
4-3-4. IGMP
Use this page to enable / disable the IGMP support.
1. Select <Edit>.
2. Press Space key to choose Enabled / Disabled.
3. Press Ctrl+A go to the action menu line.
Select
1. Select <Edit>.
2. Press Space key to choose Enabled / Disabled.
3. Press Ctrl+A go to the action menu line.
Select
<Save> to save configured values.
4-3-5. LACP
Use this page to configure and view all LACP status.
Modularized 24+2G Switch
82
4-3-5-1. Working Port Setting
Use this page to set the actual work ports in a trunk group.
1. Select
1. Select
<Edit>.
2. Group: Display the trunk group ID.
3. LACP: Display the trunk group’s LACP status.
4. LACP Work Port Num: The maximum number of ports that can be
3. LACP: Display the trunk group’s LACP status.
4. LACP Work Port Num: The maximum number of ports that can be
aggregated at the same time. If it is a LACP static trunking group, the
exceed ports are standby and able to aggregate if work
exceed ports are standby and able to aggregate if work
ports fail. If it
is a local static trunking group, the number must be the same as
group ports.
group ports.
NOTE: Before setting this page, you have to set the trunk groups on the Trunk
Configurations page first.