Printronix SL4M Guida Utente
152
Chapter
4
Printing A Configuration
4.
Before saving the modified configuration, you must delete the original
configuration if the Protect Config. option is enabled.
configuration if the Protect Config. option is enabled.
a.
Press the Up or Down keys until the following message displays:
b.
Press the Left or Right keys to cycle through the options (1-8).
When the desired number displays, press the
When the desired number displays, press the
↵ key to select it.
The following message displays:
Then, the following displays when it is deleted:
5.
Save the new configuration as described in the “Saving A Configuration”
on page 147. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.
on page 147. Make sure you select the same number (e.g., Config. 1)
when saving the modified configuration. The new configuration writes
over the existing one.
6.
Print a copy of this newest configuration and store it in a safe place. Refer
to “Printing A Configuration” on page 152.
to “Printing A Configuration” on page 152.
Printing A Configuration
We recommend that you print and store your configurations for future
reference. The printout provides a list of the parameters that were set when
you configured the printer.
reference. The printout provides a list of the parameters that were set when
you configured the printer.
To print a configuration:
1.
Press the
key to enter the Main menu.
2.
Press the Right key until the following message displays:
3.
Press the
↵ key to enter the CONFIGURATION menu.
4.
Press the Down key until the following message displays:
Delete Config.
1*
Deleting
Configuration
Configuration
Delete Config.
X*
..
.
CONFIGURATION
Print Config.
Current*