Printronix SL4M Guida Utente
244
Appendix B
Using The Full Media Rewinder With 3 Inch Diameter Core Adapters
Figure 17. Securing Media on the Media Take-Up Core
4.
Wrap the leading edge of the media around the media take-up core.
See Figure 17.
See Figure 17.
5.
Slide the media flush against the left edge of the rewinder flange.
6.
Tape the leading edge of the media onto the media take-up core.
7.
Manually rotate the media take-up core one full revolution until the media
is taut. See Figure 18.
is taut. See Figure 18.
Figure 18. Tightening the Media on the Media Take-Up Core
pgrw
lod7
Media
Media
Take-Up
Core
Take-Up
Core
Tape
Rewinder
Flange
Flange
pgrw
lod8
Media
Take-Up
Core
Take-Up
Core