Printronix SL4M Manuale Utente
100
Chapter
4
EMULATION MENU
Host Form Length
Determines how the physical label length (see Label Length under the MEDIA
SETUP menu) is affected upon receiving an EXECUTE command.
SETUP menu) is affected upon receiving an EXECUTE command.
•
Enable (factory default). The physical label length will change to match
the form length (specified in CREATE command). The physical label size
remains at the new setting until another EXECUTE command is received,
or the PRINTER SETUP menu settings are changed.
the form length (specified in CREATE command). The physical label size
remains at the new setting until another EXECUTE command is received,
or the PRINTER SETUP menu settings are changed.
•
Var. Length. The physical label length is the longest print element
defined in CREATE mode, including both static and dynamic elements,
plus the setting of “Var Form Adjust” with CREATE;NAME;0.
defined in CREATE mode, including both static and dynamic elements,
plus the setting of “Var Form Adjust” with CREATE;NAME;0.
•
Var Dynamic Len. The physical label length will change to the longest
print element defined in the form, including the dynamic element in
EXECUTE mode and the static element in CREATE mode, plus the
setting of “Var Form Adjust” with CREATE;NAME;0.
print element defined in the form, including the dynamic element in
EXECUTE mode and the static element in CREATE mode, plus the
setting of “Var Form Adjust” with CREATE;NAME;0.
•
Disable. Forms printed in EXECUTE mode do not change the physical
label size. Therefore, the size of the form (defined in CREATE mode)
must fit within the current label dimensions, or errors may occur.
label size. Therefore, the size of the form (defined in CREATE mode)
must fit within the current label dimensions, or errors may occur.
NOTE: The difference between Var. Length and Var Dynamic Len is for
example, CREATE;NAME;0. If there are 10 dynamic fields defined in
CREATE mode, but only three dynamic fields are used in EXECUTE
mode (for Var. Length), the label length will be based on the longest
printed element among the 10 dynamic field and the static element
defined in CREATE mode. For Var Dynamic Len, the label length will
be based on the longest printed element among the three fields
defined in EXECUTE mode and the Static element defined in
CREATE mode.
CREATE mode, but only three dynamic fields are used in EXECUTE
mode (for Var. Length), the label length will be based on the longest
printed element among the 10 dynamic field and the static element
defined in CREATE mode. For Var Dynamic Len, the label length will
be based on the longest printed element among the three fields
defined in EXECUTE mode and the Static element defined in
CREATE mode.
Var Form Adjust
This specifies an amount (in tenths of inches) to add to the length of variable-
length forms. Variable-length forms use a semicolon at the end of the
CREATE command: ~CREATE;<FORMNAME>;0.
length forms. Variable-length forms use a semicolon at the end of the
CREATE command: ~CREATE;<FORMNAME>;0.
Var Form Type
•
Add Nothing (factory default). When selected, no action is taken.
•
Add ;0. When selected, the form length ends at the longest printed
element. (Same as
element. (Same as
∼
CREATE;filename;0)
•
Add ;X. When selected, the form length is the same as the physical page
length (the Label Length menu under MEDIA SETUP). (Same as
length (the Label Length menu under MEDIA SETUP). (Same as
∼
CREATE;filename;X).
Optimized Ratio
This option selects different bar code ratios for certain bar codes including
Code 39 and Interleaved 2 of 5. It is included for compatibility with the
IGP-X00 printers.
Code 39 and Interleaved 2 of 5. It is included for compatibility with the
IGP-X00 printers.
•
Disable (factory default). Use standard bar code ratios.
•
Enable. Select the alternate bar code ratios.