Printronix SL4M Manuale Utente
222
Appendix B
Using The Standard Peel Without Liner Rewinder
1.
2.
Open the standard peel door by pulling it out and down.
3.
Thread the media over the peel bar, behind the standard peel roller, and
through the standard peel opening (see Figure 8 on page 221).
through the standard peel opening (see Figure 8 on page 221).
4.
Horizontally center the standard peel roller over the label.
5.
Peel the label (located over the tear bar) off the liner (refer to Figure 8 on
page 221). This will prevent the labels from sticking to the tear bar during
the initial print feed.
page 221). This will prevent the labels from sticking to the tear bar during
the initial print feed.
Figure 9. The Standard Peel Option
6.
Rotate the deck lock lever clockwise to close the pivoting deck.
7.
Close the standard peel door by pulling upward and it will lock in place.
8.
Press the
(Feed) key to advance the media to the next
TOF (Top-of-Form) position. A label dispenses with the liner falling in
front of the printer.
front of the printer.
9.
Press the (Pause) key until ONLINE displays.
10. Close the media cover.
Label
Liner
Deck Lock Lever
Standard
Peel Door