Printronix SL4M Manuale Utente
Loading Fanfold Media
31
7.
Thread the media under the media damper, through the media sensor
assembly, and then between the platen (rubber drive roller) and the
printhead. You can also refer to the label inside the media cover for media
loading instructions.
assembly, and then between the platen (rubber drive roller) and the
printhead. You can also refer to the label inside the media cover for media
loading instructions.
CAUTION
If the media width guide locking knob is too loose or is removed, the
media width guide will fall off the printer.
media width guide will fall off the printer.
8.
Turn the media width guide locking knob counterclockwise just enough to
slide the media width guide, and no more.
slide the media width guide, and no more.
9.
Position the metal guide lightly against the outside edge of the installed
media and tighten the locking knob by turning it clockwise.
media and tighten the locking knob by turning it clockwise.
10. Check the horizontal position of the media sensor assembly
Media Sensor
Assembly
Assembly
Media Sensor
Handle
Handle
Media
Damper
Damper
Platen
Media Width
Guide
Guide
Locking Knob