Printronix P5000 Manuale Utente
152
Chapter
7
Using the RibbonMinder
Running a Job
Once you have set up options for RibbonMinder, it works without attention.
When you begin printing with RibbonMinder enabled, the message display
shows a ribbon life value of 100%. The ribbon life decreases as the ink is
consumed.
When you begin printing with RibbonMinder enabled, the message display
shows a ribbon life value of 100%. The ribbon life decreases as the ink is
consumed.
New Ribbon
The New Ribbon option allows you to reset the ribbon life when you replace a
worn ribbon. It may be necessary to replace ribbons before the ink has been
depleted (e.g. when the ribbon has been snagged, folded, or otherwise
damaged).
worn ribbon. It may be necessary to replace ribbons before the ink has been
depleted (e.g. when the ribbon has been snagged, folded, or otherwise
damaged).
Table 21. New Ribbon Procedure
Step
Key
Result
Notes
1.
Replace ribbon. See your Operator’s Guide.
2.
Perform steps 2 through
5 from Table 20.
5 from Table 20.
3.
Resets ribbon life to 100%.
4.
5.
If the new ribbon is a different
size, see Table 23. Otherwise,
press UP and DOWN to lock the
ENTER key.
size, see Table 23. Otherwise,
press UP and DOWN to lock the
ENTER key.
6.
The printer is ready for normal
operation.
operation.
7.
Close the printer cover. You can resume printing.
RIBBONMINDER
New Ribbon XXX%
New Ribbon XXX%
ENTER
RIBBONMINDER
New Ribbon 100%
New Ribbon 100%
CLEAR
OFFLINE
CONFIG. CONTROL
CONFIG. CONTROL
+
ENTER SWITCH
LOCKED
LOCKED
OFFLINE
CONFIG. CONTROL
CONFIG. CONTROL
ON LINE
ONLINE
100%
<printer emulation>