Printronix P5000 Manuale Utente
Submenu
75
Font
Select a default font style and character set for the LG emulation, as follows:
•
Style. This option allows you to specify a print quality that includes a
characters per inch (cpi) and lines per inch (lpi) setting, in the format Type
cpi lpi. The default setting is DP 10 6 (Data Processing, 10 cpi, 6 lpi). The
print quality types you may choose from are as follows:
characters per inch (cpi) and lines per inch (lpi) setting, in the format Type
cpi lpi. The default setting is DP 10 6 (Data Processing, 10 cpi, 6 lpi). The
print quality types you may choose from are as follows:
DP = Data Processing (standard quality)
CORESPON = Correspondence (near letter quality)
COMPRESS = Compressed (vertically compressed for printing
CORESPON = Correspondence (near letter quality)
COMPRESS = Compressed (vertically compressed for printing
long graphs and charts)
OCR A & OCR B = Optical Character Recognition, sets A and B
HS = High Speed (Draft quality for high speed printing)
HS = High Speed (Draft quality for high speed printing)
•
Character Set. This option allows you to select a character set. The
character set you select can be any of the Digital Multinational sets, which
include the U.S. ASCII set and several foreign language and special
character sets.
character set you select can be any of the Digital Multinational sets, which
include the U.S. ASCII set and several foreign language and special
character sets.
Vert. Forms
This option defines the bottom and top form margins.
•
Bot. Frm. This option sets the bottom margin for the forms. You must
specify the bottom margin in lines (at 6 lines per inch), ranging from 0 to
198 lines (33 inches). The default setting is 66. Press NEXT to increase
the value, PREV to decrease the value, and ENTER to change units.
Selecting a value for this option resets the top margin to 0, so the top
margin must be redefined after this option is selected.
specify the bottom margin in lines (at 6 lines per inch), ranging from 0 to
198 lines (33 inches). The default setting is 66. Press NEXT to increase
the value, PREV to decrease the value, and ENTER to change units.
Selecting a value for this option resets the top margin to 0, so the top
margin must be redefined after this option is selected.
•
Top Mrg. This option sets the top margin for the forms. You must specify
the top margin in lines (at 6 lines per inch), ranging from 0 to 198 lines (33
inches). The default setting is 0. Press NEXT to increase the value, PREV
to decrease the value, and ENTER to change units. The margins will
automatically adjust so that the top and bottom margins do not cross each
other.
the top margin in lines (at 6 lines per inch), ranging from 0 to 198 lines (33
inches). The default setting is 0. Press NEXT to increase the value, PREV
to decrease the value, and ENTER to change units. The margins will
automatically adjust so that the top and bottom margins do not cross each
other.
Horiz. Forms
•
Left Mrg. This sets the left margin for the forms. You must specify the left
margin in 1/10 inch increments, from 0 to 13.1 inches. The default value is
0. Press NEXT to increase the value, PREV to decrease the value, and
ENTER to change units. The margins will automatically adjust so that the
left and right margins do not cross each other.
margin in 1/10 inch increments, from 0 to 13.1 inches. The default value is
0. Press NEXT to increase the value, PREV to decrease the value, and
ENTER to change units. The margins will automatically adjust so that the
left and right margins do not cross each other.
•
Right Mrg. This sets the right margin for the forms. You must specify the
right margin in 1/10 inch increments, from 0.1 to 13.2 inches. The default
value is 13.2. Press NEXT to increase the value, PREV to decrease the
value, and ENTER to change units. The margins will automatically adjust
so that the left and right margins do not cross each other.
right margin in 1/10 inch increments, from 0.1 to 13.2 inches. The default
value is 13.2. Press NEXT to increase the value, PREV to decrease the
value, and ENTER to change units. The margins will automatically adjust
so that the left and right margins do not cross each other.