Printronix P5000 Manuale Utente
Submenu
79
Printer Protocol
Select the LinePrinter+ protocol you wish to use. Refer to the LinePrinter Plus
Programmer’s Reference Manual for more information.
Programmer’s Reference Manual for more information.
Print Char Set
When this selection is displayed and the ENTER key is pressed, the current
character set is printed.
character set is printed.
CPI/LPI Select
This parameter lets you specify the characters per inch (cpi) and lines per
inch (lpi) values.
inch (lpi) values.
Font Attributes
Typefaces
•
Data Processing. A general purpose font printing out at 120 dpi
horizontally and 72 dpi vertically. The width of the font will vary with each
cpi.
horizontally and 72 dpi vertically. The width of the font will vary with each
cpi.
•
NLQ. A high quality font printing at 180 dpi horizontally and 96 dpi
vertically. This font has serifs and the width of the font varies with the cpi.
vertically. This font has serifs and the width of the font varies with the cpi.
•
OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
Page Format
(from page 78)
Margins
Perforation
Skip
Form Length
Form Width
Left Margin
0* columns
(0-369)
(0-369)
Right Margin
0* columns
(0-369)
(0-369)
Bottom Margin
0* lines
(0-451)
(0-451)
Disable*
1/2 inch
2/3 inch
5/6 inch
1 inch
1/2 inch
2/3 inch
5/6 inch
1 inch
Abs. Length IN
11.0* inches
(0.1-24)
(0.1-24)
Abs. Length MM
279.4* millimeters
(0.1-609.6)
(0.1-609.6)
Funct. of Lines
66* lines
(1-192)
(1-192)
Abs. Width IN
13.6* inches
(0.1-13.6)
(0.1-13.6)
Abs. Width MM
345.4* millimeters
(0.1-345.4)
(0.1-345.4)
Funct. of CPI
136* Characters
(1-272)
(1-272)
* = Factory Default