Printronix P5000 Manuale Utente
92
Chapter
4
IGP/PGL Emulation
Skip Command Prefix
This parameter determines if the printer will print any data before an IGP/PGL
command is received.
command is received.
•
Enable. The printer ignores all data on the current line before an IGP/
PGL command.
PGL command.
•
Disable. The printer will print all data on the current line before an IGP/
PGL command.
PGL command.
Power On IGP/PGL
You can set the IGP/PGL feature so that it is enabled or disabled when the
printer is powered on.
printer is powered on.
•
Enable. The IGP/PGL is enabled when the printer is powered on. (The
IGP/PGL feature is initialized in the Normal mode.)
IGP/PGL feature is initialized in the Normal mode.)
•
Disable. The IGP/PGL is disabled when the printer is powered on. (The
IGP/PGL feature is initialized to the Quiet mode.)
IGP/PGL feature is initialized to the Quiet mode.)
Extended Execute Copy
•
Disable. Dynamic data, overlay data, etc. are not allowed if the optional
Form Count parameter (number of forms to print) is specified as part of
the Execute command. (This setting is IGP-100 compatible.)
Form Count parameter (number of forms to print) is specified as part of
the Execute command. (This setting is IGP-100 compatible.)
•
Enable. Dynamic data, overlay data, etc. are allowed within a form in
which the Form Count parameter is specified in the Execute command. In
this case, the exact same form (with identical dynamic data, etc.) is
printed for whatever the Form Count is. However, incremental data is not
incremented since the page that is printing is exactly the same. Also,
each form is printed on a separate page.
which the Form Count parameter is specified in the Execute command. In
this case, the exact same form (with identical dynamic data, etc.) is
printed for whatever the Form Count is. However, incremental data is not
incremented since the page that is printing is exactly the same. Also,
each form is printed on a separate page.
UPC Descenders
This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
readable data is not presented in the UPC/EAN bar codes.
•
Always. UPC/EAN bar codes are printed with descenders, even if there
is no human readable data.
is no human readable data.
•
Never. UPC/EAN bar codes are printed without descenders if there is no
human readable data.
human readable data.
•
Only with PDF. UPC/EAN bar codes are printed with descenders only
when the PDF command is presented.
when the PDF command is presented.
Compressed CPI
•
Disable. The IGP/PGL does not compress characters.
•
Enable. The IGP/PGL compresses characters (60% shorter) for 17 or 20
CPI fonts instead of using the normal height character.
CPI fonts instead of using the normal height character.