Printronix P5000 Manuale Utente
Centronics (Parallel) Submenu
239
Timeout
This is the value used by the printer to time out from the current port
and check the other selected port types for data to print. When the
printer has not received data from the host after a certain period of
time, it needs to timeout in order to service the other ports.
and check the other selected port types for data to print. When the
printer has not received data from the host after a certain period of
time, it needs to timeout in order to service the other ports.
Report Status
•
Disable (default). When a fault occurs on the printer, only the
active port reports the fault to the host.
active port reports the fault to the host.
•
Enable. The port will report any fault even when it is not the
current active port.
current active port.
Centronics (Parallel) Submenu
Centronics
Data Bit 8
Prime
Signal
TOF Action
Buffer Size
in K
Enable*
Disable
Disable
Enable*
Disable
Disable
Standard*
Inverted
Inverted
Standard*
Inverted
Inverted
Enable*
Disable
Disable
Leading*
Trailing
Trailing
Enable*
Disable
Disable
Reset*
Do Nothing
Do Nothing
16*
(1-15)
(1-15)
* = Factory Default
PI Ignored
Data
Polarity
Resp.
Polarity
Busy on
Strobe
Latch Data
On
Auto
Trickle
Disable*
Enable
Enable
Trickle
Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off