Printronix P5000 Guida All'Installazione Rapida
Chapter 1
Basic Operating Procedures
44
4.
Pull the new paper above and behind the ribbon mask, but in front of
the existing paper. (The ribbon mask location is shown on the ribbon
path diagram.) If necessary, gently press the existing paper back.
Align the top edge of the new paper with the top perforation of the
existing paper.
the existing paper. (The ribbon mask location is shown on the ribbon
path diagram.) If necessary, gently press the existing paper back.
Align the top edge of the new paper with the top perforation of the
existing paper.
5.
Load the new paper over the existing paper. Open and load the
tractors one at a time to prevent the paper from slipping.
tractors one at a time to prevent the paper from slipping.
New Paper
Existing Paper
Note
Ensure that the top edge of the new paper lines up with the top perforation of
the existing paper.
the existing paper.