Printronix P5000LJ Manuale Di Riferimento
132
Chapter
4
Configuring the Proprinter III XL Emulation with Control Codes
Line Spacing 1/8 Inch (8 lpi)
ASCII Code ESC 0
Hex Code
1B 30
Dec Code
27 48
Purpose
Specifies continuous line spacing at 1/8-inch increments (8 lpi).
Discussion When the 1/8-inch line spacing control code is received, all lines
will be printed at 8 lpi until a new line spacing is selected or the
printer is reset.
printer is reset.
Example
The following example illustrates 1/8-inch line spacing.
Line Spacing 7/72 Inch (10.3 lpi)
ASCII Code ESC 1
Hex Code
1B 31
Dec Code
27 49
Purpose
Specifies the line spacing at 7/72-inch (10.3 lpi) increments.
Discussion When the 7/72-inch line spacing control code is received, all
lines will be printed at the 7/72-inch line spacing until a new line
spacing is selected or the printer is reset. The control code line
spacing selection will override the control panel line spacing
setting, and the message display will reflect the line spacing as
10.3 lines per inch.
spacing is selected or the printer is reset. The control code line
spacing selection will override the control panel line spacing
setting, and the message display will reflect the line spacing as
10.3 lines per inch.
Caution should be used when combining this control code with
other print attributes such as Elongated (Double High),
Superscript, or Subscript; overlapping lines may occur.
other print attributes such as Elongated (Double High),
Superscript, or Subscript; overlapping lines may occur.
Example
The following example illustrates 7/72-inch line spacing.