Printronix SL4M Istruzione Sull'Installazione
Control Panel
17
Run A Barcode Demo Test
Before you send an actual print job, run a bar code demo test:
1.
Set the printer power switch to | (On).
2.
When ONLINE or OFFLINE displays on the printer’s LCD,
press
press
to enter Menu mode.
3.
Press the Down and
↵
keys at the same time until THE
↵
KEY
IS UNLOCKED displays.
4.
Press the Right key until
DIAGNOSTICS displays.
5.
Press
↵
to enter the
DIAGNOSTICS menu. The Printer
Tests submenu is selected.
6.
Press the Right key until Barcode Demo displays.
7.
Press
↵
. The printer will go online, and the Barcode Demo test
pattern will start and print two bar codes.
8.
If desired, you can run additional printer tests, such as Grey,
Grid, and Checkerboard. See step 2 above to start other tests.
Grid, and Checkerboard. See step 2 above to start other tests.
9.
If you encounter print quality problems, refer to “Printhead
Adjustments” in the
Adjustments” in the
User’s Manual (located on the CD-ROM
included with this book).
Hidden Menus
By default, menu items for advanced users are hidden (they do not
appear in the menu structure). To display these hidden menus, set
Admin User to Enable (in the
appear in the menu structure). To display these hidden menus, set
Admin User to Enable (in the
PRINTER SETUP menu).
Run The Printer Setup Wizard
Run the Printer Setup Wizard (located on the CD-ROM) to install
the printer drivers and to configure the printer.
the printer drivers and to configure the printer.