Equator ez1710 v Manuale Supplementare
5
3a. Filter
3a. Switch off the power. Remove
foreign objects if any from the filter
housing. Clean filter and proceed to
3d.
foreign objects if any from the filter
housing. Clean filter and proceed to
3d.
3b. Drain hose
3b. Check for kinks or blockage.
3c. Drain
3c. Drain standpipe inlet more than
36" above the floor. Blocked drain.
(direct connection)
36" above the floor. Blocked drain.
(direct connection)
3d. Pump
3d.Turn pump impeller manually, it
moves in jerks of 180 degrees
because of the presence of magnets
on the rotor, weak magnets will
produce mild jerks.
moves in jerks of 180 degrees
because of the presence of magnets
on the rotor, weak magnets will
produce mild jerks.
3. Won't drain
3e. Timer
3e. Set Wash timer knob to Off-Dry
and switch On the power. Test for
115V AC at the pump connector, if
present the pump is bad, if 115 is
not present the timer is bad.
and switch On the power. Test for
115V AC at the pump connector, if
present the pump is bad, if 115 is
not present the timer is bad.
4a. Not leveled.
4a. Adjust leveling legs, tighten lock
nuts.
nuts.
4b. Foreign object in tub.
4b. Check tub, remove object.
4. Noisy
4c. Shock Absorber.
4c. Check that attachment bolts are
tight.
tight.
5a. Shipping brackets attached.
5a. Remove & store shipping
brackets.
brackets.
5b. Unstable floor
5b. Remove carpeting, move to
another location, or install
underlayment.
another location, or install
underlayment.
5. Vibrates
5c. Not leveled properly
5c. Adjust leveling legs, tighten lock
nuts.
nuts.
5d. Drum not leveled
5d. If vibration persists then open
the top cover and see if the drum is
leveled up. If not the position of the
springs holding the drum may have
to be adjusted.
the top cover and see if the drum is
leveled up. If not the position of the
springs holding the drum may have
to be adjusted.
6. Water leaks
from detergent
drawer
from detergent
drawer
6a. Not leveled.
6a. Adjust leveling legs, tighten lock
nuts.
nuts.