Toshiba 1000-s157 Guida Utente
66
Learning the Basics
Using diskettes
5.375 x 8.375 ver 2.3
Using diskettes
The 3.5-inch diskette drive, which fits in the Modular Bay,
lets you use either double-density (720 KB) or high-density
(1.44 MB) diskettes for data transfer and storage.
lets you use either double-density (720 KB) or high-density
(1.44 MB) diskettes for data transfer and storage.
If your diskette drive is not already installed in the Modular
Bay, install it following the directions in
Bay, install it following the directions in
Diskette drive
The Modular Bay light glows when the diskette drive is in
use.
use.
Inserting and removing diskettes
1
Hold the diskette so that the arrow on its upper surface
points toward the drive.
points toward the drive.
2
Push the diskette gently into the drive slot on the left side
of the computer. When the diskette is in place, the eject
button pops out.
of the computer. When the diskette is in place, the eject
button pops out.
To release a diskette from the drive, push the eject button.
CAUTION: Never press the eject button or turn off the computer
while the light is glowing. Doing so could destroy data and
damage the diskette or the drive.
while the light is glowing. Doing so could destroy data and
damage the diskette or the drive.
Caring for diskettes
❖
Store your diskettes properly to protect them and keep
them clean.
them clean.
Eject button