HP 14 dBi 5GHz Directional J9000A Manuale Utente

System grounding and lightning protection are essential, especially for 
exterior-mounted antennas exposed to the elements. Never install an 
antenna where it may fall and contact electrical lines (refer to the 
National Electrical Code).

HP WARRANTY INFORMATION
See the Customer Support/Warranty booklet included with this product. A copy 
of the specific warranty terms applicable to your ProCurve products and replace-
ment parts can be obtained from your HP Sales and Service Office or authorized 
dealer.

SUPPORT
Hewlett-Packard offers support 24 hours  day, seven days a week through the 
use of a number of automated electronic services. See the Customer Support 
Warranty booklet that came with your product for information on how to use 
these services to get technical support. You can also get up-to-date support 
information from the ProCurve Web site: www.procurve.com

Additionally, your HP-authorized network reseller can provide you with assis-
tance, both with services that they offer and with services offered by ProCurve.

The information contained herein is subject to 
change without notice.

 *5991-3840*

 

J9000A

Designed for wireless LAN service, the ProCurve J9000A is a directional 
patch array enclosed in a UV-stable weatherproof radome. The focused 
radiation pattern may be used to extend point-to-point link coverage or 
to provide targeted sector coverage in the 5 Ghz band.

The ProCurve J9000A and all associated equipment should be installed 
in accordance with applicable local and national electrical code guide-
lines to ensure safe operation.

The J9000A may be mounted at interior or exterior locations. A line-of-
sight signal path works best for point-to-point links.  Although 5 Ghz 
signals penetrate cubical dividers and interior partitions with little 
attenuation, reinforced block walls, banks of metal cabinets, or steel 
shelving may attenuate signals or cause multipath, a condition where 
reflected signals interfere with the primary signal. Because antenna 
beamwidth is narrow, it is important to aim the antenna accurately dur-
ing installation, in order to provide optimum gain and best performance.

The J9000A is supplied with a universal articulating mount that accepts 
mast diameters up to 2 inches (5.1cm) or mounts to any flat vertical 
surface. This mount is especially designed to provide wide-range articu-
lation in both the azimuth and elevation planes.

Frequency, MHz

5150 - 5875

Gain with specified cable (dBi):

13.3

VSWR max.

2.0:1

E-Plane (3 dB beamwidth):

27° 

H-Plane (3 dB beamwidth):

29°

Polarization:

Linear, (Vertical)

Impedance (Ohms)

50

Weight lb. (kg)

0.7 (0.3)

Dimensions, in. 
(cm):

4.16 x 4.16 x 1.375
(10.6 x 10.6 x 3.5)

Mounting Style

Flush wall mount

Wind Surface Area ft

2

 (m

2

)

0.12 (0.011)

Wind Survival mph (km/hr)

120 (193)

Enclosure

PVC/Acrylic

RF Connector:

Reverse SMA (male)

Cable

33-inch CMP Plenum

Storage Temperature (min/max)

-40° / +65°C 

Operating Temperature (min/max)

-30° / +55°C)