Aiptek dvz100 pro Guida Utente

Please charge the battery at least 8 hours for first time use.

1.  Connect the cable. 

Connect one end of the supplied AC adapter to the USB port 

of the camcorder and the other end to a wall outlet. 

 

OR 

 

Connect one end of the supplied USB cable to the USB port 

of the camcorder and the other end to a powered PC. Make 

sure the camcorder is powered off.

2.  The charging LED turns red and the charge starts. 

3.  When the charging LED turns off, the battery pack is fully 

charged.

 When using a PC to charge the battery, do not power on the 

camcorder, or the charge will stop.

1.  Slide the battery cover open as indicated.

2.  Place the accessory Li-Ion battery into the compartment. 

Note that the metallic contacts must be aligned with the 

contacts in the compartment.

3.  After the battery is properly installed, replace the battery 

cover.