Netgear gsm7312 Manuale Utente

Switching Commands

7-39

This command enables or disables IGMP Snooping on the system. The default value is disable.

This command sets the IGMP Group Membership Interval time on the system. The Group 
Membership Interval time is the amount of time in seconds that a switch will wait for a report from 
a particular group on a particular interface before deleting the interface from the entry. This value 
must be greater than the IGMP Maximum Response time value. The range is 1 to 3600 seconds.

260 seconds

This command sets the IGMP Maximum Response time on the system. The Maximum Response 
time is the amount of time in seconds that a switch will wait after sending a query on an interface 
because it did not receive a report for a particular group in that interface. This value must be less 
than the IGMP Query Interval time value. The range is 1 to 3600 seconds.

10 seconds

This command sets the Multicast Router Present Expiration time on the system. This is the amount 
of time in seconds that a switch will wait for a query to be received on an interface before the 
interface is removed from the list of interfaces with multicast routers attached. The range is 0 to 
3600 seconds. A value of 0 indicates an infinite timeout, i.e. no expiration.

0