Netgear gsm7312 Manuale Utente

Switching Commands

7-73

This command assigns the specified authentication login list to the specified user for system login. 
The 

 must be a configured 

and the 

must be a configured login list.

If the user is assigned a login list that requires remote authentication, all access to the interface 
from all CLI, web, and telnet sessions will be blocked until the authentication is complete. Refer to 
the discussion of maximum delay in the ‘config radius maxretransmit’ and ‘config radius timeout’ 
commands

.

Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental 
lockout from the switch.

This command displays the ordered authentication methods for all authentication login lists.

This displays the authentication login listname.

This displays the first method in the specified authentication login list, if any.

This displays the second method in the specified authentication login list, if any.

This displays the third method in the specified authentication login list, if any.

This command displays information about the users assigned to the specified authentication login 
list. If the login is assigned to non-configured users, the user “default” will appear in the user 
column.

This field displays the user assigned to the specified authentication login list.

This field displays the component (User or 802.1x) for which the authentication 
login list is assigned.

This command displays 802.1x port security user information for locally configured users.