Netgear gsm7312 Manuale Utente
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
8-5
202-10009-01
Format
config router route preference <local/static> <0-255>
config router route default create
This command configures the default route. The value for <nexthopip> is a valid IP address of the
next hop router.
next hop router.
Format
config router route default create <nexthopip>
config router route default delete
This command causes the static default route to be deleted.
Format
config router route default delete
ARP Commands
show arp table
This command displays the Address Resolution Protocol (ARP) cache. The displayed results are
not the total ARP entries. To view the total ARP entries, the operator should view the show arp
table
not the total ARP entries. To view the total ARP entries, the operator should view the show arp
table
results in conjunction with the show arp switch results.
Format
show arp table
Age Time (seconds)
The time it takes for an ARP entry to age out. This value was configured into the
unit. Age time is measured in seconds.
Response Time (seconds) The time it takes for an ARP request timeout. This value was configured into the
unit. Response time is measured in seconds.
Retries
The maximum number of times an ARP request is retried. This value was
configured into the unit.
Cache Size
The maximum number of entries in the ARP table. This value was configured
into the unit.
IP Address
The IP assigned to each interface.
MAC Address
The hardware MAC address that each interface maps to.
Interface
The associated slot.port which identifies an ARP entry.
Type
The type that was configured into the unit. The possible values are Local,
Gateway, Dynamic and Static.