Manualsbrain.com
  1. Manuali
  2. Marche
  3. Netgear
  4. gsm7312
  5. Manuale Utente

Netgear gsm7312 Manuale Utente

Scarica
Pagina di 268
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software 
8-16
Routing Commands
202-10009-01
  
show router ospf interface info 
This command displays the information for the IFO object or virtual interface tables.
Format  
show router ospf interface info <slot.port>
IP Address  
Represents the IP address for the specified interface. This is a configured value.
Subnet Mask  
A mask of the network and host portion of the IP address for the OSPF interface. 
This value was configured into the unit. This is a configured value. 
OSPF Admin Mode   
States whether OSPF is enabled or disabled on a router interface. This is a 
configured value. 
OSPF Area ID  
Represents the OSPF Area Id for the specified interface. This is a configured 
value.
Router Priority   
A number representing the OSPF Priority for the specified interface. This is a 
configured value. 
Retransmit Interval   
A number representing the OSPF Retransmit Interval for the specified interface. 
This is a configured value. 
Hello Interval  
A number representing the OSPF Hello Interval for the specified interface. This 
is a configured value. 
Dead Interval   
A number representing the OSPF Dead Interval for the specified interface. This 
is a configured value. 
LSA Ack Interval  
A number representing the OSPF LSA Acknowledgement Interval for the 
specified interface. 
Iftransit Delay Interval  
A number representing the OSPF Transit Delay for the specified interface. This 
is a configured value. 
Authentication Type  
The OSPF Authentication Type for the specified interface are: none and simple. 
This is a configured value. 
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type  
Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast'. 
The OSPF Interface Type will be 'broadcast'. 
State  
The OSPF Interface States are: down, loopback, waiting, point-to-point, 
designated router, and backup designated router. This is the state of the OSPF 
interface.
Designated Router   
The IP address representing the designated router. 
Backup Designated Router    The IP address representing the backup designated router. 
Number of Link Events  
The number of link events. 
Metric Cost  
The cost of the ospf interface. This is a configured value.