Netgear gsm7312 Manuale Utente

8-24

Routing Commands

Exchange - the router is describing its entire link state database by sending 

Database Description packets to the neighbor. 

Loading - Link State Request packets are sent to the neighbor asking for the 

more recent LSAs that have been discovered (but not yet received) in the 
Exchange state.

Full - the neighboring routers are fully adjacent and they will now appear in 

router-LSAs and network-LSAs.

The number of times this neighbor relationship has changed state, or an error has 

occurred.

This variable displays the status of the entry, either dynamic or permanent. This 

refers to how the neighbor became known. 

This indicates whether Hellos are being suppressed to the neighbor. The types 

are enabled and disabled.

 

An integer representing the current length of the retransmission queue of the 

specified neighbor router Id of the specified interface.

This command displays the OSPF neighbor table list. When a particular neighbor ID is specified, 
detailed information about a neighbor is given. The information below will only be displayed if 
OSPF is enabled.

A 4 digit dotted decimal number representing the neighbor interface.

An IP address representing the neighbor interface.

A slot.port identifying the neighbor interface index.

This command displays the OSPF stub table. The information below will only be displayed if 
OSPF is initialized on the switch.

A 32-bit identifier for the created stub area.

The type of service associated with the stub metric. The 7000 Series L3 Switch 

only supports Normal TOS.

The metric value is applied based on the TOS. It defaults to the least metric of 

the type of service among the interfaces to other areas. The OSPF cost for a 
route is a function of the metric value.

The type of metric advertised as the default route.

Controls the import of summary LSAs into stub areas.