Netgear gsm7312 Manuale Utente
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Differentiated Services
9-11
202-10009-01
Default
none
Format
config diffserv class match protocol number
<classname> <0-255> [exclude]
config diffserv class match refclass
This command adds to or removes from the specified class definition the set of match conditions
defined for another class. The
defined for another class. The
<classname>
is the name of an existing DiffServ class. The
<refclassname>
is the name of an existing DiffServ class whose match conditions are being
referenced by the specified class definition.
Note: there is no
[exclude]
option for this match command.
Default
none
Format
config diffserv class match refclass <add/remove>
<classname> <refclassname>
Restrictions
The class types of both <classname> and <refclassname> must be
identical (i.e., any vs. any, or all vs. all). A class type of acl is not supported by
this command.
identical (i.e., any vs. any, or all vs. all). A class type of acl is not supported by
this command.
Cannot specify <refclassname> the same as <classname> (i.e., self-
referencing of class name not allowed).
referencing of class name not allowed).
At most one other class may be referenced by a class.
Any attempt to delete the <refclassname> class while still referenced by
any <classname> shall fail.
any <classname> shall fail.
The combined match criteria of <classname> and <refclassname>
must be an allowed combination based on the class type. Any subsequent
changes to the <refclassname> class match criteria must maintain this
validity, or the change attempt shall fail.
must be an allowed combination based on the class type. Any subsequent
changes to the <refclassname> class match criteria must maintain this
validity, or the change attempt shall fail.
The total number of class rules formed by the complete reference class chain
(includes both predecessor and successor classes) must not exceed a platform-
specific maximum.
(includes both predecessor and successor classes) must not exceed a platform-
specific maximum.
In some cases, each removal of a refclass rule reduces the maximum number of
available rules in the class definition by one.
available rules in the class definition by one.