Netgear gsm7312 Manuale Utente
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
7-12
Switching Commands
202-10009-01
show eventlog
This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset.
log is not cleared on a system reset.
Format
show eventlog
File
The file in which the event originated.
Line
The line number of the event.
Task Id
The task ID of the event.
Code
The event code.
Time
The time this event occurred.
Note:
Event log information is retained across a switch reset.
show msglog
This command displays the message log maintained by the switch. The message log contains
system trace information.
system trace information.
The trap log contains a maximum of 256 entries that wrap.
Format
show msglog
Message
The message that has been logged.
Note:
Message log information is not retained across a switch reset.
show traplog
This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap.
Format
show traplog
Number of Traps since
last reset
The number of traps that have occurred since the last reset of this device.
Number of Traps since log
last displayed
The number of traps that have occurred since the traps were last displayed.
Getting the traps by any method (terminal interface display, Web display, upload
file from switch etc.) will result in this counter being cleared to 0.
Getting the traps by any method (terminal interface display, Web display, upload
file from switch etc.) will result in this counter being cleared to 0.
Log
The sequence number of this trap.
System Up Time
The relative time since the last reboot of the switch at which this trap occurred.
Trap
The relevant information of this trap.
Note:
Trap log information is not retained across a switch reset.