Netgear gsm7312 Manuale Utente

7-18

Switching Commands

This command adds (and names) a new SNMP community. A community name is a name 
associated with the switch and with a set of SNMP managers that manage it with a specified 
privileged level. The length of name can be up to 16 case-sensitive characters.

Community names in the SNMP community table must be unique. If you make multiple 

entries using the same community name, the first entry is kept and processed and all duplicate 
entries are ignored. 

Two default community names: Public and Private. You can replace these 
default community names with unique identifiers for each community. The 
default values for the remaining four community names are blank.

This command removes this community name from the table. The name is the community name to 
be deleted.

 <name>

This command sets an IP address for an SNMP community. The address is the associated 
community SNMP packet sending address. The name is the applicable community name. The 
community name may be up to 16 alphanumeric characters. 

0.0.0.0

This command sets a client IP mask for an SNMP community. The address is the associated 
community SNMP packet sending address. The name is the applicable community name. The 
community name may be up to 16 alphanumeric characters. 

0.0.0.0