Netgear gsm7312 Manuale Utente

Switching Commands

7-21

This command enables or disables the Authentication Flag.

enable

This command enables or disables the broadcast storm trap. When enabled, broadcast storm traps 
are sent only if the broadcast storm recovery mode setting associated with the port is enabled (see 
“config switchconfig broadcast” on page 24).

enable

This command enables or disables Link Up/Down traps for the entire switch. When enabled, link 
traps are sent only if the Link Trap flag setting associated with the port is enabled (see “config port 
linktrap” on page 26).

enable

This command enables or disables Multiple User traps. When the traps are enabled, a Multiple 
User Trap is sent when a user logs in to the terminal interface (EIA 232 or telnet) and there is an 
existing terminal interface session.

enable

This command enables or disables the sending of new root traps and topology change notification 
traps.

enable